PDA

View Full Version : The Making of the Round Trap.....



Gigem
11-24-2009, 10:52 AM
A lot of folks have asked me how we make our round traps......Here ya go!



I started out rolling the rings first, then trying to weld them together....Big Pain! Now we weld the frame of the trap together flat....like a big ladder.



http://www.tacticalhogcontrol.com/clark/round%20trap%20flat%20frame.JPG



Then, after a trip through the plate roller....



http://www.tacticalhogcontrol.com/clark/round%20trap%20in%20plate%20roll.JPG



We have the basic trap. Now we add the secondary top ring and then we put the hog panel on the inside and start welding it in place...



http://www.tacticalhogcontrol.com/clark/round%20trap%20panel%20installation.JPG







All we have to do now is to weld the door in place, add to springs and go trapping!



http://www.tacticalhogcontrol.com/clark/round%20set%20side%20view.JPG

http://www.tacticalhogcontrol.com/forum/images/misc/progress.gif

BustedAssRanch
11-25-2009, 03:11 AM
Sweet !